So you’ve tried so hard and got so far, in the end, you couldn’t connect the Bluetooth to your Kenwood stereo. Don’t disappoint yourself. How about we tell you how you can get the job done? Who says you need to get yourself a mechanic to connect the Bluetooth though? All you need is to get some easy-peasy steps to follow and even you can solve your problem.
Let’s take you on a tour on how to connect Bluetooth to Kenwood stereo right now. Follow these simple steps and you can be your own mechanic in no time.
Table of Contents
Register Your Bluetooth Device In Kenwood Car Stereo
First of all, you have to register your Bluetooth device or cell phone to make it usable with the Kenwood car stereo. This machine has a maximum capacity of 5 devices.
The pairing technique varies depending on the Bluetooth version of the device. For Bluetooth 2.1, you can use Secure Simple Pairing to pair the unit and the device, which simply requires confirmation. For a Bluetooth 2.0 device, you must input the supplied PIN code on both the unit and the device.
Step 1: To begin, make sure your device's Bluetooth is turned on.
Step 2: To connect with Bluetooth 2.0, start registering a unit by running the Bluetooth device. Register the audio unit or hands-free unit by pairing. Select the unit name from the collection of spotted units.
Step 3: If the screen displays “PAIRING PASS ****** (Bluetooth device name) PRESS VOLUME KNOB,” proceed to step 4.
Step 4: Insert the PIN code in your Bluetooth device.
Step 5: When you press the [Control knob], pairing begins. When it's finished, the message "PAIRING OK" shows.
To connect with Bluetooth 2.1, a request to pair is sent from the device you are using. Your Kenwood car stereo Bluetooth pairing is now done.
How To Connect iPhone To Kenwood Car Stereo Bluetooth?
This device works with Apple's Auto Pairing feature. When you connect your iPhone or iPod touch to this unit through USB, it will automatically be recognized as a Bluetooth device. You’ll see “AUTO PAIRING” show up.
Step 1: Turn on the Bluetooth of the iPhone or iPod touch first.
Step 2: Connect an iPhone or iPod touch to the USB terminal.
Step 3: To pair, press the volume knob once you have confirmed the passcode.
The receiver has now been connected to the device.
How To Connect Android To Kenwood Car Stereo Bluetooth?
You must choose from two or more Bluetooth devices if two or more have already been registered.
Step 1: Press the telephone button. “BT MODE” is shown, and the phone enters Bluetooth mode.
Step 2: To find SETTINGS, use the Control knob. Then go to PAIRING>PHONE SELECT (to choose your cell phone) or AUDIO SELECT (to select audio player).
Step 3: To pick a Bluetooth device, turn the Control knob.
Your Android device should now be connected through Bluetooth to your Kenwood car audio.
Regardless of whatever device you are using, the answer to “how to connect Kenwood car stereo Bluetooth” is straightforward. Hope this article was helpful to know about how to connect Bluetooth to Kenwood Stereo.
More Guides for Kenwood Users: